Example 1: Single-sided vs Double-sided lights

Example 2: Size of lights, shadows and intensity

Example 3: Real-world lights have inverse-square falloff

Example 4: Skylight, self-illuminated panels and VRayLights

Example 5: IBL (Image-Based Lighting)

Example 6: IBL and Caustics

Example 7: Combined sampling of lights

Example 1: Single-sided vs Double-sided lights

This example demonstrates the difference between a single-sided and a double-sided planar area light:

Double-sided is off
Double-sided is on

Example 2: Size of lights, shadows and intensity

The following images show how the size of a light affects shadows. Bigger lights produce blurrier shadows, while smaller lights produce sharper shadows:

U size = 3.0; Normalize intensity is on
U size = 6.0; Normalize intensity is on
U size = 12.0; Normalize intensity is on

 

In the above images, the light appears to be of constant intensity. This is because the Normalize intensity option was turned on. This is what the three images look like with Normalize intensity off (the default). Larger luminaires have larger surfaces, which means that they emit more light. Note that the light multiplier had to be adjusted compared to the previous three images in order to produce similar light intensity; however, it is the same multiplier for all three images.

U size = 3.0; Normalize intensity is off (default)
U size = 6.0; Normalize intensity is off (default)
U size = 12.0; Normalize intensity is off (default)

Example 3: Real-world lights have inverse square falloff

The following images demonstrate the No decay parameter. In the real world the light sources attenuate with the inverse square of the distance from the light to the shaded surface. However you can disable light decay to achieve behavior similar to the standard 3ds Max lights. The settings for the light source the same for both images with the exception of the Decay parameter:

No decay is off (default)
No decay is on

 

Example 4: Skylight, self-illuminated panels and VRayLights

Here is an example of a simple room where the light comes from the environment. The scene was rendered in several different ways:

 

In all cases, the Light cache was used as a secondary GI engine. The environment, the self-illuminated panel, and the VRayLight all have the exact same color and multiplier.

 

Environment light (skylight) only
Self-illuminated panel at the window

VRayLight at the window
Environment light (skylight) only and brute force GI

 

As you can see, all methods produce the same light distribution, but there is a difference between render times and quality.

 

In the first two cases, we rely on the irradiance map to capture the lighting coming from the window. The result is very similar, as well as the rendering times. Since the irradiance map is a blurry method, the shadows come out a little blurred. Although we can reduce the blurring by using higher irradiance map settings, this will cost us additional render time.

 

In the third case, since we use a VRayLight, the shadows come out very sharp and nice, and the rendering time is reduced. This is because the irradiance map was calculated much faster - in the previous two cases, it had to trace a lot of rays to sample the window accurately.

 

In the fourth case, we used brute force GI instead of the irradiance map. This produces sharp shadows too, since the brute force GI is a non-blurry GI method. However, render time has increased quite a lot.

 

In this exampe, using a VRayLight produces the best result in the shortest time. However, if you need to have many lights, this method can become quite slow, since every single light needs to be sampled.

Example 5: IBL (Image-Based Lighting)

IBL (image-based lighting) is a new feature, provided by V-Ray renderer.

The V-Ray dome light has been extended to support arbitrary texture maps that determine the amount of light coming from each direction on the virtual dome hemisphere. V-Ray then uses importance sampling to trace more rays in the directions where most of the light is coming from. This ensures speed and quality that were never before possible with pure gathering GI methods.

 

In the following example we will show how this works with a HDR image.

 

 

 

Initial position of the dome-light.

Z axis is perpendicular to the ground plane.

Rendered image

Position 1

This time the dome is rotated along its Z axis to 90 degrees. Notice this has no effect, as the dome is using the same part of the HDRI.

Rendered image

Position 2

The dome is rotated along its X axis to 90 degrees. Now the dome uses another part of the HDRI.

Rendered image

Position 3

The dome is rotated along its X axis to -165 degrees. Notice how the shadows have changed, due to the softer light in the HDRI.

Rendered image

Position 4

Another 90 degrees on the X axis from the previous position. A slightly sharper shadow has appeared.

Rendered image

 

Now we are going to show how the HDRI parameters also can affect the rendered image.

We will rotate the HDRI from the material editor.

 

 

Position 5

Rotating the HDRI to -200 degree. Now the dome obviously uses some of the brightest range from it.

Rendered image

 

This time we will reduce the HDRI multiplier and add more rotation.

 

 

Position 5

Rotating the HDRI to -300 degree. Notice how the multiplier affects the overal scene lighting. We haven't change the dome position.

Rendered image

 

We will go further, adding some vertical rotation to the HDRI.

 

 

Position 5

Adding 50 degrees vertical rotation to the HDRI. See how light and shadows have changed a lot. The highlight position is different now.

Rendered image

 

Reset the horizontal rotation to 0.0. Multilpliers: 2.0 and 5.0

 

 

Rendered image

Rendered image

 

Example 6: IBL and Caustics

From the VRay Caustics rollout, turn caustics on. Assign a glass material on the cylinders.

 

Position 5

 

We are using the last setup of the HDRI from the Example 5. The caustic effect is almost not visible.

Rendered image

 

We will raise the multilplier to 3.0 and set the search distance to 1.0 unit.

 

Position 5

 

Now the effect is visible, though the search distance appear to be too small.

Rendered image

 

 

Caustics multiplier set to 5.0 , 10.0 . Search distance 5.0 units.

 

Rendered image

Rendered image

 

 

Other caustics examples.

Rendered image

Rendered image

 

Example 7: Combined sampling of area lights

This example demonstrates combined sampling of area lights with direct and indirect lighting in V-Ray. A Mesh light is shown here, but the same principle applies in varying degrees to all other modes of the VRayLight. It is also valid for VRayLightMtl materials with the Direct lighting option on.

Direct illumination only (GI is off) - areas close to the light are noisy, while areas far from the light are smooth. It will take a lot more samples to clear the noise. Only GI (Brute force) - areas away from the light are noisy, while areas close to the light are smooth. It will take a lot more samples to clear the noise. Direct illumination and GI - combined sampling - both areas close to the light and areas away from it are smooth.