General

Parameters

Notes

 

Search Keywords: exposure 

General

The VRayExoposureControl allows you to use the exposure settings of a VRayPhysicalCamera without actually having to render through one.

Parameters

Mode - allows you to choose between several modes of applying the exposure control.

 

From VRay camera - the exposure settings are taken from a VRayPhysicalCamera specified in the Camera node

 

From EV parameter - the exposure settings are based on the Exposure value (EV) parameter

 

Photographic - the exposure is controlled through the Shutter speed, f-number and ISO parameters

 

Camera node - specifies the VRayPhysical camera node from which the exposure settings will be taken

 

Exposure value (EV) - controls the exposure with a single parameter. Increasing it makes the image darker and decreasing it makes it brighter

 

Shutter speed - the shutter speed, in inverse seconds, for the still photographic camera. For example, shutter speed of 1/30 s corresponds to a value of 30 for this parameter.

 

f-number - determines the width of the camera aperture and the exposure.

 

ISO - determines the film power (i.e. sensitivity). Smaller values make the image darker, while larger values make it brighter.

 

White balance preset - allows additional modification of the image output. Objects in the scene that have the specified color will appear white in the image. Note that only the color hue is taken into consideration; the brightness of the color is ignored. There are several presets that can be used, most notably the Daylight preset for exterior scenes.

 

White balance - specifies a custom color for the white balance.

 

Temperature - when the the White balance preset is set to Temperature this parameter allows you to control the white balance color

 

Notes